How to Change the Dimension Size of Autocad Dimension

You Might Also Like: How to Change the Dimension Size of Autocad Dimension

For those who are beginners may feel confused when a working drawing on autocad has dimensions that are different from the original dimension, here I will explain when we have a working picture but the scale that is given has changed or no longer a 1: 1 scale to equalize the original We must first know how much comparison is given in the working drawings in order to be equated.

Using scale on autocad is actually not difficult enough just a few steps we can change that scale, I assume all who read the article I already know what is meant by understanding the scale so I do not review at length about the understanding of the scale.

Some methods may already be explained how to scale autocad with different versions but I will explain in my own way.

How to change the unit in autocad and the scale of my autocad dimension will describe one by one, here is a brief description:

1. First please open the working drawing you want to equate the scale, after that drag the dimensions on the picture, work example please see the picture above.

2. after the pull of the dimension we can distinguish that the original dimensions and new dimensions there is a considerable difference, this is where we will adjust the scale on the dimension by dividing for him, The formula of the original dimension divided into new dimensions when in get the amount that became the benchmark to adjust the scale The.Example =  242,5 : 48. 5230 = 4.99762999

3. After the results were in can please set the dimension by typing D on autocat it will appear the command for setting the dimensions autocad, please copy the results of the code earlier to the field I put a red box.

4. Set another format by following the red color column

5. Resize the dimensions can be adjusted, when finished please click okay.

Please can see the results, the deeds that we make already seen the results.

This method is usually done to draw another dimension, when there is a working image that has not been given the dimensions but the scale given is not 1: 1 we need this way to make changes in scale.

The main dimension is used to create the main scale benchmark so that the resulting output can be in accordance with the desired one.

This way can be used to scalp object in autocad, enlarge digit dimension in autocad, set scale in autocad and other part. Hopefully this article can be useful. Thanks